Key takeaways
- Kershaw Select Fire review: a 3.4-inch 8Cr13MoV folding knife with a swing-out bit driver, four bits, liner lock and reversible clip for everyday carry.
Most folding knives do one job. The Kershaw Select Fire, model 1920, was designed by Grant and Gavin Hawk around a different idea: a full-size folding knife that also carries a small screwdriver set inside its handle. It pairs a 3.4-inch drop point blade with a swing-out bit driver and four bits stored in the handle, so the single tool riding in a pocket covers everyday cutting and the loose screws that turn up around the house, the desk, and the car.
That knife-first layout is what separates the Select Fire from plier-based multi-tools. The blade is the main event here, a bead-blasted 8Cr13MoV stainless steel blade opened by a manual thumb stud and held open by a liner lock, while the driver stays folded away until it is needed. This review walks through the published specifications, who the design suits, and where its limits sit, so it is clear what this everyday carry tool can handle and what it cannot replace.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
The Kershaw Select Fire is a knife-focused everyday carry tool: a 3.4-inch 8Cr13MoV drop point blade in a glass-filled nylon handle that also stores four screwdriver bits and a swing-out 1/4-inch hex driver. It suits anyone who cuts daily and tightens the occasional screw, but it does not replace a plier-based multi-tool or a full screwdriver set.
Key Specs
| Specification | Detail |
|---|---|
| Model | 1920 |
| Designer | Grant and Gavin Hawk |
| Blade steel | 8Cr13MoV stainless steel |
| Blade length | 3.4 in |
| Blade style | Drop point |
| Blade finish | Bead-blasted |
| Blade thickness | 0.121 in |
| Overall length | 7.6 in |
| Closed length | 4.25 in |
| Handle material | Glass-filled nylon, black |
| Handle thickness | 0.625 in |
| Locking mechanism | Liner lock |
| Opening | Manual opening, thumb stud |
| Bit driver | Swing-out 1/4-inch hex drive, with ruler |
| Bits included | 4 pieces: 2 flathead and 2 Phillips (crosshead) |
| Pocket clip | Reversible, tip-down, right or left carry |
| Weight | 5 oz |
| Country of origin | not stated |
Who It’s For and Who Should Skip It
Who it’s for: The Select Fire fits everyday carriers whose day mixes cutting with small fix-it jobs: opening boxes, trimming cord, tightening a loose cabinet hinge, swapping batteries in a toy, or snugging down a license plate frame. Because the four bits store inside the handle and the driver swings out only when called on, there is no separate screwdriver to carry and no pouch on the belt. The reversible pocket clip supports right- or left-handed tip-down carry, and at 5 oz with a 4.25-inch closed length it rides like a normal mid-size folder rather than a bulky tool kit.
Who should skip it: Anyone who regularly needs pliers, wire cutters, a saw, or a file should look at a plier-based multi-tool instead, because the Select Fire has none of those implements. Drivers who turn screws all day will also find the short bit driver short on leverage compared with a full-size handled screwdriver, and the four included bits cover only the most common flathead and Phillips sizes. Knife carriers who want the slimmest possible handle may also pass, since the bit storage makes the handle 0.625 in thick.
How It Compares With Typical Alternatives
Against a plain folding knife of similar blade length, the Select Fire trades a little handle slimness for a working screwdriver. A plain folder is usually thinner and sometimes lighter, but it leaves its owner borrowing a coin or a key when a screw needs turning. The Select Fire keeps a comparable blade, the same liner lock and thumb stud layout, and the same pocket clip carry, then adds the driver and bit storage on top.
Against a plier-based multi-tool, the trade runs the other way. A multi-tool packs pliers and a dozen or more implements into the handle, but its knife blade is often a secondary, smaller tool. The Select Fire starts from the blade: a full 3.4-inch drop point that handles daily cutting without compromise, supported by one well-chosen extra function instead of many small ones. For pockets that mostly need a knife and an occasional driver, that focus keeps the tool simpler and easier to carry.
Against a dedicated screwdriver or a separate bit set, the Select Fire is the convenience option rather than the capability option. Its swing-out driver reaches recessed screws better than the short drivers built into many pocket tools, and it accepts standard 1/4-inch bits, so the included four are a starting point rather than a fixed limit. A handled screwdriver still wins on torque, comfort over long sessions, and bit selection, which is why this knife complements a toolbox instead of replacing it.
FAQ
What bits does the Kershaw Select Fire include?
It includes four bits, two flathead and two Phillips crosshead, stored in carriers inside the handle. The swing-out driver is a 1/4-inch hex drive, so standard 1/4-inch bits can be swapped in when a different size or type is needed.
What steel is the blade made from, and how is it finished?
The blade is 8Cr13MoV stainless steel with a bead-blasted matte finish. Kershaw describes this steel as taking and holding an edge well while staying easy to resharpen, which suits a working everyday carry blade.
Is the pocket clip reversible?
Yes. The pocket clip is reversible and supports right- or left-handed tip-down carry, so the knife can be set up for either pocket.
Does the Select Fire have assisted opening?
No. It is a manual opening knife with a thumb stud, and a liner lock secures the blade in the open position during use.
Final Verdict
The Kershaw Select Fire earns its place in an everyday carry rotation by refusing to choose between a real knife and a useful driver. The 3.4-inch 8Cr13MoV blade, liner lock, and reversible clip cover the folding knife basics without shortcuts, and the swing-out 1/4-inch driver with four stored bits handles the small screws that otherwise send people hunting for a toolbox. It is not a multi-tool and not a screwdriver set, and it does not pretend to be either. For carriers who cut every day and turn a screw most days, it is a tidy, honest combination in a single 5 oz package.
Related articles